null
Skip to main content

Call us! 218-441-5854

73-33578-3-HDWR KIT - P-51 Landing Gear Retracting Strut Connecting Rod Hardware Kit (73-33578-3-HDWR KIT)

73-33578-3-HDWR KIT - P-51 Landing Gear Retracting Strut Connecting Rod Hardware Kit (73-33578-3-HDWR KIT)

SKU: 73-33578-3-HDWR KIT
$34.99

This kit contains hardware for a complete 73-33578 Hardware Overhaul Kit. (Rods and Rod Ends sold separately. See links Below)

Part #: 73-33578-3-HDWR KIT

Aircraft: P-51 Mustang

Kit Contains:

(2) AN-316-7R Nut - Thin Check

(2) AN936-A7-6 Lock Washer Type A

(2) AN932-21 Clevis Pin

(2) AN380-2-2 Cotter Pin

 

73-33578-3-ACP - ROD ASSEMBLY – LANDING GEAR RETRACTING STRUT CONNECTING assembly is also PMA approved and available from AIRCORPS AVIATION 

AirCorps recommends these inspections / actions.

  • Rod assemblies should be visually checked during pre-flight to verify there are no visible cracks, tube and rod ends are not bent, and Down Indicator Switch Special Bolt is not bent or rotated from alignment with the switch. Know your aircraft so any change will draw your attention.
  • Replace any lightweight ATE-6N rod ends with the heavier later variants such as this Schafer ATE-6N rod end. (For information regarding rod end identification click HERE.) 
  • Magnaflux testing rod ends if performing any landing gear maintenance work.
  • Install a take-up spring as a preventative measure to ensure that, upon a failure, the broken rod does not wedge and prevent extension or retraction.
  • Thoroughly inspect during each annual inspection

Read our Comprehensive maintenance article to learn more.

https://www.aircorpsaviation.com/mark-on-maintenance-p-51-landing-gear-retration-rod-end-failure-safety-spring-installation/

 

Drawing available on AirCorps Library

https://app.aircorpslibrary.com/Drawing/Viewer/73-33578/

 

Tube – Landing Gear Retracting Strut Connecting Rod - 73-33578-2-ACP

https://www.aircorpsdepot.com/aircraft-parts/tube-landing-gear-retracting-strut-connecting-rod-73-33578-2-acp/

 

Heavy ATE-6N P-51 Rod End

https://www.aircorpsdepot.com/aircraft-parts/heavy-ate-6n-p-51-rod-end/

 

 

 

 

Details

This kit contains hardware for a complete 73-33578 Hardware Overhaul Kit. (Rods and Rod Ends sold separately. See links Below)

Part #: 73-33578-3-HDWR KIT

Aircraft: P-51 Mustang

Kit Contains:

(2) AN-316-7R Nut - Thin Check

(2) AN936-A7-6 Lock Washer Type A

(2) AN932-21 Clevis Pin

(2) AN380-2-2 Cotter Pin

 

73-33578-3-ACP - ROD ASSEMBLY – LANDING GEAR RETRACTING STRUT CONNECTING assembly is also PMA approved and available from AIRCORPS AVIATION 

AirCorps recommends these inspections / actions.

  • Rod assemblies should be visually checked during pre-flight to verify there are no visible cracks, tube and rod ends are not bent, and Down Indicator Switch Special Bolt is not bent or rotated from alignment with the switch. Know your aircraft so any change will draw your attention.
  • Replace any lightweight ATE-6N rod ends with the heavier later variants such as this Schafer ATE-6N rod end. (For information regarding rod end identification click HERE.) 
  • Magnaflux testing rod ends if performing any landing gear maintenance work.
  • Install a take-up spring as a preventative measure to ensure that, upon a failure, the broken rod does not wedge and prevent extension or retraction.
  • Thoroughly inspect during each annual inspection

Read our Comprehensive maintenance article to learn more.

https://www.aircorpsaviation.com/mark-on-maintenance-p-51-landing-gear-retration-rod-end-failure-safety-spring-installation/

 

Drawing available on AirCorps Library

https://app.aircorpslibrary.com/Drawing/Viewer/73-33578/

 

Tube – Landing Gear Retracting Strut Connecting Rod - 73-33578-2-ACP

https://www.aircorpsdepot.com/aircraft-parts/tube-landing-gear-retracting-strut-connecting-rod-73-33578-2-acp/

 

Heavy ATE-6N P-51 Rod End

https://www.aircorpsdepot.com/aircraft-parts/heavy-ate-6n-p-51-rod-end/

 

 

 

 

Related Products

73-33541 - Rod - Landing Gear Pin Push
Add to Cart

73-33541 - Rod - Landing Gear Pin Push

This 73-33541 Rod - Landing Gear Pin Push is in NS condition designed and engineered by North American Aircraft in the 1940's using original manufacturing methods and materials for the XP-51, P-51A,...

$325.00