Aircraft Hardware

104938 Brush Assembly - Slip Ring, NS Condition for Curtiss Electric Prop. Brush Assembly  Part Number: 104938Part Type: Brush Assembly - Slip RingMFG: Curtiss ElectricCondition: NS   Photos are...

73-33578-3-HDWR KIT hardware kit for a complete 73-33578 overhaul, for the P-51 Mustang. Rods and rod ends sold separately.Part Number: 73-33578-3-HDWR KITPart Type: Landing Gear Retracting Strut...

AN3022-2 is a WWII-era military grade toggle switch manufactured by Cutler-Hammer. Part Number: AN3022-2Manufacturer: Cutler-Hammer, Milwaukee, WIRating: 5 Amp | 125 Volt A.C. / 35 Amp | 24 Volt D.C...

EA-125 radio filter, Type EA-125, made by Solar. NS condition, 4 amp rating.Part Number: EA-125Part Type: Radio FilterManufacturer: SolarCondition: NSRating: 4 ampPhotos are for reference only.

B-5A is a lighted tip toggle switch used in various aircraft electrical systems.Part Number: B-5APart Type: Toggle SwitchMfg: Cutler HammerAircraft: VariousCondition: NSPhotos are for reference only.

404307 is a rubber boot manufactured by Bendix Pacific Division, used as a protective cover for hydraulic sequence valves in the 403196 Series, 402004 Series, and 401275-4 Series. The boot shields...

434126 is an exhaust pipe clamp assembly for the Wright R-1820 Cyclone radial engine, used to secure and retain exhaust pipe joints within the engine exhaust system. Maintains exhaust pipe alignment...

471-2D is an Aeroquip reusable hose end fitting for Aeroquip 306 low-pressure rubber hose, used in aircraft hydraulic, fuel, oil, pneumatic, and coolant systems. The fitting consists of three...

471-3D is an Aeroquip reusable hose end fitting for Aeroquip 306 low-pressure rubber hose, used in aircraft hydraulic, fuel, oil, pneumatic, and coolant systems. The fitting consists of three...

471-4D is an Aeroquip reusable hose end fitting for Aeroquip 306 low-pressure rubber hose, used in aircraft hydraulic, fuel, oil, pneumatic, and coolant systems. The fitting consists of three...

471-6D is an Aeroquip reusable hose end fitting for Aeroquip 306 low-pressure rubber hose, used in aircraft hydraulic, fuel, oil, pneumatic, and coolant systems. The fitting consists of three...

471-8D is an Aeroquip reusable hose end fitting for Aeroquip 306 low-pressure rubber hose, used in aircraft hydraulic, fuel, oil, pneumatic, and coolant systems. The fitting consists of three...

FC-5921 is a Wagner Mfg. rubber boot - master cylinder for the Bendix / Gidair brake master cylinder used in Boeing Stearman aircraft. Protects the push rod and piston rod end from contamination,...

GA52152-D is a Gidair piston - master cylinder (3/4" bore) for the Bendix / Gidair brake master cylinder used in Boeing Stearman aircraft. The primary pressure-generating piston for the 3/4" bore...

GA52152-B is a Gidair piston - master cylinder (7/8" bore) for the Bendix / Gidair brake master cylinder used in Boeing Stearman aircraft. The primary pressure-generating piston for the 7/8" bore...