33001 Landing Gear Installation (Main Gear)

73-33578-3-ACP landing gear retracting strut connecting rod assembly, FAA-PMA approved design, ready for install, for the P-51 Mustang.Part Number: 73-33578-3-ACP (NAA Part Number 73-33578-3)Part Type: Rod Assembly, Landing Gear Retracting Strut...

73-33578-2-ACP landing gear retracting strut connecting rod tube, FAA-PMA approved design, ready for install, for the P-51 Mustang.Part Number: 73-33578-2-ACP (NAA Part Number 73-33578-2)Part Type: Tube, Landing Gear Retracting Strut Connecting...

511124M brake assembly, 7.6 x .100/.125 x 9 high pressure, for the P-51 Mustang. Repaired and serviceable.Part Number: 511124MPart Type: Brake Assembly, 7.6 x .100/.125 x 9 High PressureAircraft: P-51Condition: RepairStatus: ServiceableWork Completed:...

57328-ACP is an FAA-PMA approved axle assembly for the P-51 Mustang landing gear, approved design and ready for install.Bendix Part Number: 57328Aircorps Part Number: 57328-ACPPart Type: Axle, Landing GearAircraft: P-51 MustangApplication: One per...

530597-1 is a rotating brake disc used in the Goodyear high pressure brake assembly on the P-51 Mustang landing gear.Part Number: 530597-1Part Type: Disc - Rotating - SteelMfg: GoodyearUsed In: Brake assembly 511124M, 511124MINext Assembly:...

73-33578-3-HDWR KIT hardware kit for a complete 73-33578 overhaul, for the P-51 Mustang. Rods and rod ends sold separately.Part Number: 73-33578-3-HDWR KITPart Type: Landing Gear Retracting Strut Connecting Rod Hardware KitAircraft: P-51 MustangKit...

This 530596-1 Disc - Stationary - Steel is in NS condition and ready to be parts of a P-51 Mustang aircraft restoration! Part Number: 530596-1Part Type: Disc - Stationary - Steel Mfg: GoodyearPart Features: This 530596-1 part number...

67973 is a Arm - Landing Gear Torque RH, used in the Main Landing Gear installation of the P-51 Mustang. Commonly referred to as the "Pork Chop" Part Number: 67973Part Type: Arm - Landing Gear Torque RHPart Features: Overhauled and Mag Tested...

67972 is a Arm - Landing Gear Torque LH, used in the Main Landing Gear installation of the P-51 Mustang. Commonly referred to as the "Pork Chop" Part Number: 67972Part Type: Arm - Landing Gear Torque LHPart Features: Overhauled and Mag Tested...

66584 is a Landing Gear Pivot Shaft & Ring Assembly, used in the Main Landing Gear installation of the P-51 Mustang. Part Number: 66584Part Type: Landing Gear Pivot Shaft & Ring AssemblyPart Features: Overhauled and Mag TestedAircraft:...

This 65915-ACP  Bushing - Spacer (LH Only) (Bendix) is a FAA-PMA approved part for use on the P-51 Mustang. Replaces: original BENDIX part number 65915. Part Number: 65915-ACPPart Type: Bushing - Spacer (LH Only) (Bendix)Aircraft:...

This 65666-ACP  Pad - Jack (Bendix) is ready to be part of your P51 landing gear restoration project! FAA-PMA: Reverse engineered and manufactured by Aircorps Aviation under the Parts Manufacturer Approval program...

This 54253-ACP Washer - Torsion Link (Bendix) is a FAA-PMA approved part for use on the P-51 Mustang. Replaces: original BENDIX part number 54253. Part Number: 54253-ACPPart Type: Washer - Torsion Link (Bendix)Aircraft: P51...

This 65646-ACP  Roller (Bendix) is a FAA-PMA approved part for use on the P-51 Mustang. Replaces: original BENDIX part number 65646 Part Number: 65646-ACPPart Type: Roller (Bendix)Aircraft: P51 MustangCondition: NE. FAA-PMA...

This 67959-ACP  Bolt - Special - 1/2-20 x 5 (BENDIX) is a FAA-PMA approved part for use on the P-51 Mustang. Replaces: original BENDIX part number 67959. Part Number: 67959-ACP  Part Type: Bolt - Special - 1/2-20 x 5...