Aircraft Hardware

This is a part number S6A-275 Spring manufactured by Dzus, it's ready to be part of various aircraft restoration projects!ABOUT: Dzus Fasteners are made of heat-treated and cadmium plated nickle steel*, and consist of a grommet, spring, and stud,...

This is a part number S6A-250 Spring manufactured by Dzus, it's ready to be part of various aircraft restoration projects!ABOUT: Dzus Fasteners are made of heat-treated and cadmium plated nickle steel*, and consist of a grommet, spring, and stud,...

This is a part number S6A-225 Spring manufactured by Dzus, it's ready to be part of various aircraft restoration projects!ABOUT: Dzus Fasteners are made of heat-treated and cadmium plated nickle steel*, and consist of a grommet, spring, and stud,...

This is a part number GF6-1/2-250 SS Grommet manufactured by Dzus, it's ready to be part of various aircraft restoration projects!ABOUT: Dzus Fasteners are made of heat-treated and cadmium plated nickle steel*, and consist of a grommet, spring, and...

This is a part number GF6-1/2-500 Grommet manufactured by Dzus, it's ready to be part of various aircraft restoration projects!ABOUT: Dzus Fasteners are made of heat-treated and cadmium plated nickle steel*, and consist of a grommet, spring, and stud,...

This is a part number FA6-1/2-75 Stud manufactured by Dzus, it's ready to be part of various aircraft restoration projects!ABOUT: Dzus Fasteners are made of heat-treated and cadmium plated nickle steel*, and consist of a grommet, spring, and stud,...

his AW6-1/2-50 DZUS Stud Winged is in NS condition and ready to be part of any aircraft restoration project!Part Number: AW6-1/2-50Part Type: AW6-1/2-50 DZUS Stud WingedPart Features: This is an original Part in NS condition. Due to...

his AW5-30 DZUS Stud Winged is in NS condition and ready to be part of any aircraft restoration project!Part Number: AW5-30Part Type: AW5-30 DZUS Stud WingedPart Features: This is an original Part in NS condition. Due to age and shelf...

his AW4-40 DZUS Stud Winged is in NS condition and ready to be part of any aircraft restoration project!Part Number: AW4-40Part Type: AW4-40 DZUS Stud WingedPart Features: This is an original Part in NS condition. Due to age and shelf...

About: The Dzus Fastener system consists of a cad plated steel stud, an aluminum grommet, and a music wire spring. They are used in covers, plates, cowlings, and similar units, which require quick removal and replacement. When studs are worn,...

About: The Dzus Fastener system consists of a cad plated steel stud, an aluminum grommet, and a music wire spring. They are used in covers, plates, cowlings, and similar units, which require quick removal and replacement. When studs are worn,...

About: The Dzus Fastener system consists of a cad plated steel stud, an aluminum grommet, and a music wire spring. They are used in covers, plates, cowlings, and similar units, which require quick removal and replacement. When studs are worn,...

This PSM-12.5 Breaker is in as-is condition and ready to be part of various aircraft restoration projects!Part Number: PSM-12.5Part Type: BreakerMfg: VariousAircraft: VariousCondition: Tested, ServiceableDETAILS: Psm Circuit Breaker - Push Type

AN6225-36 - Packing "V" Ring Hydraulic - Chevron is a fresh production and pliable seal in New Manufacture (NM) condition. AirCorps Depot had this seal produced to support operators and maintainers working on landing gear and other component overhauls...

AN6225-29 - Packing "V" Ring Hydraulic - Chevron is a fresh production and pliable seal in New Manufacture (NM) condition. AirCorps Depot had this seal produced to support operators and maintainers working on landing gear and other component overhauls...