Aircraft Hardware

22NA1-82 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-82AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 8-32 thread, nylon locking insert, cadmium plated carbon...

22NA1-62 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-62AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 6-32 thread, nylon locking insert, cadmium plated carbon...

22NA1-064 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-064AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 3/8-24 thread, nylon locking insert, cadmium plated...

22NA1-054 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-054AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 5/16-24 thread, nylon locking insert, cadmium plated...

22NA1-048 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-048AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 1/4-28 thread, nylon locking insert, cadmium plated...

22NA1-02BC100 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-02BC100AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 10-32 thread, nylon locking insert, cadmium...

22NA1-02 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-02AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 10-32 thread, nylon locking insert, cadmium plated...

AC852-16-16 is a Parker Appliance Company 90-degree elbow fitting for hose-to-pipe-thread connections from the pre-AN AC852 series. Also known as Parker HLC-16-16. Confirmed in B-25 Mitchell fuel...

AC852-12 is a Parker Appliance Company 90-degree elbow fitting combining a hose connection and a pipe thread port, 2-1/2 inches in length, from the pre-AN Parker AC852 fittings series. Used in...

AC811T4CS is a Parker Appliance Company sleeve (ferrule) for the AC811 flareless tube fitting series used on the B-25 Mitchell and P-51 Mustang. The AC811 series is a pre-AN Parker Aircraft Coupling...

5346K13 is a brass barbed straight adapter hose fitting for air and water service. The barb end accepts 1/4 inch inside diameter hose; the male threaded end is 1/8 NPTF (National Pipe Taper Fuel,...

42H11968 is a Type A-7 signal flare container assembly. Signal flare containers were used in WWII-era aircraft to store pyrotechnic signal flares for use in emergency, identification, or distress...

401-AH is a Parker primer knob. Used on Parker-type engine primer systems to operate the primer pump. Part Number: 401-AH Type: Knob, Parker Primer Manufacturer: Parker Application: Engine primer...

3326X4 is a Weatherhead (Eaton) brass close nipple with 1/4-18 NPT male pipe thread on both ends. Rated to 1,200 psi working pressure. Suitable for fuel, instrumentation, pneumatic, air brake, and...

271-12D is a swivel nipple conforming to MS24588-12, the military standard for reusable hose-to-tube adapter nipples in hydraulic, fuel, and oil lines. The dash -12 designates 3/4 inch tubing OD. The...