P-51 Mustang

109-318224 is a North American Aviation bolt for retaining the cockpit enclosure truck roller on the P-51D Mustang. The cockpit enclosure truck roller is part of the sliding canopy mechanism; this...

106-71098 is a North American Aviation support bracket for the SCR-522 VHF radio antenna mast on the P-51D Mustang. The SCR-522 was the standard VHF transceiver fitted to the P-51D.Constructed from...

109-54177 is a North American Aviation cover assembly for the generator controls box on the P-51D Mustang. Fits the 106-54171 Generator Controls Box Assembly. Part Number: 109-54177 Type: Cover...

106-31414-1 is the right-hand variant of the North American Aviation fuselage firewall to wing center section bulkhead seal for the P-51D Mustang Part Number: 106-31414-1 Type: Seal, Fuselage...

106-31414 is a North American Aviation left-hand seal for the junction of the fuselage firewall to the wing center section bulkhead on the P-51D Mustang. Part Number: 106-31414 Type: Seal, Fuselage...

102-31958-2-ACPM is the snubbing washer sub-component of the P-51 Mustang engine shock support (Lord mount) bushing assembly. Part of the engine vibration isolation mount system, this washer is...

37A3495 is a Type C-4 / C-4A Fuel strainer cover gasket used in the fuel strainer assembly on P-51 Mustang, P-38 Lightning, and other WWII aircraft equipped with compatible carburetor systems. Seals...

102-46131-ACP - Bushing Assembly - Coolant Radiator Flexible Mount Part Type: Bushing Assembly - Coolant Radiator Flexible MountPart Features: PMA approved partAircraft: P-51, VariousCondition:...

67973 is a Arm - Landing Gear Torque RH, used in the Main Landing Gear installation of the P-51 Mustang. Commonly referred to as the "Pork Chop" Part Number: 67973Part Type: Arm - Landing Gear Torque...

67972 is a Arm - Landing Gear Torque LH, used in the Main Landing Gear installation of the P-51 Mustang. Commonly referred to as the "Pork Chop" Part Number: 67972Part Type: Arm - Landing Gear Torque...

66584 is a Landing Gear Pivot Shaft & Ring Assembly, used in the Main Landing Gear installation of the P-51 Mustang. Part Number: 66584Part Type: Landing Gear Pivot Shaft & Ring AssemblyPart...

This AN8013-1 - Washer - 7/8"O.D. X 11/64"I.D. is in NS condition and ready to be part of P-51, Various aircraft restoration projects!Part Number: AN8013-1Part Type:  Washer - 7/8"O.D. X 11/64"I.D...

This AN8013-2 - Washer - 1 3/8"O.D. X 17/64"I.D. is in NS condition and ready to be part of P-51, Various aircraft restoration projects!Part Number: AN8013-2Part Type: AN8013-2 - Washer - 1 3/8"O.D...

This AN8013D1 - Washer - 7/8 O.D. X 11/64 I.D. is in NS condition and ready to be part of P-51, Various aircraft restoration projects!Part Number: AN8013D1Part Type: Washer - 7/8 O.D. X 11/64 I.D...

This AN778-4 - Connector - Fluid - 45 Deg. - Steel - is in NS condition and ready to be part of aircraft restoration projects!Part Number: AN778-4Part Type: Connector - Fluid - 45 Deg. - SteelPart...