Aircraft Hardware

22NA1-048 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-048AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 1/4-28 thread, nylon locking insert, cadmium plated...

22NA1-02BC100 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-02BC100AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 10-32 thread, nylon locking insert, cadmium...

22NA1-02 NUT - ANCHOR, TWO LUG, SELF-LOCKINGPART NUMBER: 22NA1-02AIRCRAFT: VariousCONDITION: NSDETAILS: Two lug fixed self-locking anchor nut, 10-32 thread, nylon locking insert, cadmium plated...

AC852-16-16 brass 90 degree pipe thread to hose elbow, 1 in. pipe x 1 in. hose, NS condition.Part Number: AC852-16-16Part Type: Elbow - Pipe Thread and Hose - 90 DegreeCondition: NSThread: 1 in. pipe...

AC852-12 brass 90 degree pipe thread to hose elbow, 3/4 in. pipe x 3/4 in. hose, NS condition.Part Number: AC852-12Part Type: Elbow - Pipe Thread and Hose - 90 DegreeCondition: NSThread: 3/4 in. pipe...

AC811T4CS AC811 Duronze bronze coupling sleeve for 1/4 in. OD tube, NS condition.Part Number: AC811T4CSPart Type: Sleeve - CouplingCondition: NSThread: None (sleeve), fits 1/4 in. OD tubeThe AC811-T...

5346K13 is a brass barbed straight adapter hose fitting for air and water service. The barb end accepts 1/4 inch inside diameter hose; the male threaded end is 1/8 NPTF (National Pipe Taper Fuel,...

42H11968 is a Type A-7 signal flare container assembly. Signal flare containers were used in WWII-era aircraft to store pyrotechnic signal flares for use in emergency, identification, or distress...

401-AH is a Parker primer knob. Used on Parker-type engine primer systems to operate the primer pump. Part Number: 401-AH Type: Knob, Parker Primer Manufacturer: Parker Application: Engine primer...

3326X4 is a Weatherhead (Eaton) brass close nipple with 1/4-18 NPT male pipe thread on both ends. Rated to 1,200 psi working pressure. Suitable for fuel, instrumentation, pneumatic, air brake, and...

271-12D is a swivel nipple conforming to MS24588-12, the military standard for reusable hose-to-tube adapter nipples in hydraulic, fuel, and oil lines. The dash -12 designates 3/4 inch tubing OD. The...

22G1-064 is an anchor nut (also called a floating anchor nut or anchor plate nut) for aircraft structure. Anchor nuts are used where a captive threaded fastener is required in sheet metal or...

1R3-2 is a threaded rod end for aircraft control system linkages. Threaded rod ends are used to provide adjustable-length connections in push-pull control tubes, cable turnbuckle systems, and...

1R1-13 is a clevis-type rod end of the resistance welded construction. Used in aircraft control system linkages, push-pull rods, and actuator connections where a clevis fork attachment is required...

15-52420 is a bearing for the pilot's rudder pedal assembly. Rudder pedal bearings support the pivoting action of the rudder pedal pivot shaft in the cockpit flight control system.  Part Number:...