Aircraft Hardware

GF6-1/2-312 is a Dzus Type GF full grommet with a 1/2" width and a .312" length, in aluminum. It is installed in the removable panel to protect the panel hole, protect the panel finish, and provide a...

GF6-250 SS is a Dzus Type GF full grommet with a 7/16" width and a .250" length, in corrosion resistant steel. It is installed in the removable panel to protect the panel hole, protect the panel...

GF6-1/2-350 is a Dzus Type GF full grommet with a 1/2" width and a .350" length, in aluminum. It is installed in the removable panel to protect the panel hole, protect the panel finish, and provide a...

S5A-250 is a Dzus Type S5A retention spring with a .250" height, for use with size 5 (5/16" body diameter) Dzus studs. The spring rivets to the support structure and the stud cams into it with a...

39A2450 is the North American Aviation drawing number for a Dzus Type SB spring, alternate part number SB4-1, for use with size 4 (1/4 inch body diameter) Dzus fasteners. Type SB and Type SC springs...

GSA6-1/2-90 is a Dzus Type GSA assembly, a special grommet permanently attached to a Type AJ6-1/2 oval head stud, with a .900" working length. The period Dzus catalog describes the Type GSA as a...

FW6-1/2-50 is a Dzus Type FW quarter-turn stud with a flush winged head, a 13/32" body diameter, and a .500" working length. Sits flush with the panel when locked and the wing allows tool-free...

FJ6-1/2-80 is a Dzus Type FJ quarter-turn stud with a flush head with a long undercut, a 13/32" body diameter, and a .800" working length. Sits flush with the panel surface for exterior skins and...

FJ6-1/2-60 is a Dzus Type FJ quarter-turn stud with a flush head with a long undercut, a 13/32" body diameter, and a .600" working length. Sits flush with the panel surface for exterior skins and...

FJ6-1/2-55 is a Dzus Type FJ quarter-turn stud with a flush head with a long undercut, a 13/32" body diameter, and a .550" working length. Sits flush with the panel surface for exterior skins and...

FJ6-1/2-100 is a Dzus Type FJ quarter-turn stud with a flush head with a long undercut, a 13/32" body diameter, and a 1.000" working length. Sits flush with the panel surface for exterior skins and...

AW5-45 is a Dzus Type AW quarter-turn stud with an oval winged head with a short undercut, a 5/16" body diameter, and a .450" working length. The wing allows tool-free operation. Body dimensions...

AW4-35 is a Dzus Type AW quarter-turn stud with an oval winged head with a short undercut, a 1/4" body diameter, and a .350" working length. The wing allows tool-free operation. Body dimensions match...

AJW5-50 is a Dzus Type AJW quarter-turn stud with an oval winged head with a long undercut, a 5/16" body diameter, and a .500" working length. The wing allows tool-free operation, and the long...

AJW5-35 is a Dzus Type AJW quarter-turn stud with an oval winged head with a long undercut, a 5/16" body diameter, and a .350" working length. The wing allows tool-free operation, and the long...